English  |
| Quantity: | |
|---|---|
Advantage of Best 100w Portable Sun Energy Power Foldable Panels Solar Charger for Camping
High Efficiency: HINERGY 100W portable solar panel kit is made from the US, up to 22% efficiency, 1/3 lighter than the same power of solar silicon. The total power increased by 1/3 in comparison with the same portable solar panel kit size.
Wide Compatibility: HINERGY 100W foldable solar panel is compatible with most solar generator/portable power station on the market. The portable solar panel kit includes different sizes of connectors for portable generator( MC-4 to Anderson / MC-4 to DC ).
Foldable & Portable: The foldable portable solar panel 100W is great for traveling off the beaten path without access to electricity and won't take up much room in your bag. HIENRGY foldable solar charger features 1*MC-4 output(25A max), providing endless power for laptop, power station in camping, outdoor, garden, motorhome, and caravan under the sun.
Durability: The foldable solar panel 100W constructed with durable and waterproof nylon and adjustable bracket to receive the most effective sunlight. Short circuit and surge protection technology keep you and your devices safe.
Easy Setup: HINERGY portable solar panels for camping is featured with 2 adjustable kickstands placed firmly on any surface ground for better solar absorption(increase 35% sunlight than flat laying). It just takes a few seconds for setup, very easy for outdoor activities.
| Peak Power | 100W |
| Cell Efficiency | 22% |
| Voltage at Max Power(Vmp) | 18V |
| Current at Max Power(Imp) | 5.6A |
| Open Circuit Voltage(Voc) | 22.4V |
| Short Circuit Current | 6.0A |
| Operating Temperature | -40℃±85℃ |
| Output Connector | MC4 |
| Folding Number | 2 |
| Unfolded Dimension | 1220*650*10 MM |
| Folded Dimension | 650*510*30 MM |
| Net Weight | 3.6 KGS |
Waterproof & Durable
Equipped with a rugged water resistant, anti-shock, dust-proof exterior for outdoor use. Can also be affixed to your backup, bicycle or tent when you're out enjoying the great outdoors.
Portable&Compact
It can be folded as a briefcase size(510×650×30mm/20×25.6×1.2inch 3.6kg/7.9lb) for easy transport and great for any outdoor hiking or camping.
How to connect 2 portable solar charging panels in series and parallel?
The solar panel is equipped with PV-rated, output MC-4 cables. The Positive connector is a male connector and the negative connector is a female connector, these wires by themselves are rated for series connections.
When the solar panels are connected in series (+ connected to -, + connected to-), the voltage is added;
when the solar panels are connected in parallel (+ connected to +,-connected to -), the current is added.
Note: Parallel connection, it need to purchase extra MC-4 Y connectors, (Negative to Negative, Positive to Positive)
Which brands of portable solar power generator are compatible with your foldable solar panel charging?
Hinergy 200W 12V folding solar panel uses an MC-4 connector and 4 connectors(DC7909/8, XT60, Aviation Connector, Anderson)which are suitable for most solar generators on the market, especially the bigger ones, such as Jackery/Ecoflow/Anker/Rockpals/Bluetti power station etc. With your controller(not included) and alligator clip(not included), it can also charge for the 12V batteries, such as the battery of RV/car/boat, Lifepo4, lithium, AGM, lead-acid, GEL, etc.
Is the portable foldable solar panel waterproof and how to keep the panel surface clean?
Yes, the folding solar panel charger is IP68 water-resistant that will protect from water splashing. Do not place it under the rain, or to soak in water for a long time.
What should I do if the foldable solar charger cannot charge my device?
1. Cloudy weather and unstable sunlight may cause current fluctuations and hinder charging. Please place the portable solar panel charger 100W in direct sunlight or wait for the weather to clear.
2. Check the device to make sure whether the device supports solar panel charging.
3. Check to see whether the output voltage of the solar panel meets the input voltage range of the device to be charged.
